Nominal pressure is bar (3.0 MPa) to bar (5.0 MPa). The allowable temperature range is from-70 ℃ to 200 ℃. Consideration should be given to the effect of temperature on the bearing capacity and not to carbon dioxide..
Packing & Delivery
Installation Instructions When installing the hose, you need to consider the direction of installation, because the shock hose can only absorb and axial in the correct direction of the displacement movement.
The shock tube can not be stressed after installation, it needs to be aligned and installed (no offsets at both ends) and cannot be stretched or bent by external forces. The fixed end of the installation must be directly connected to the rear of the shock hose. In the continuous operation, the maximum amplitude is ±1mm, when the start or stop, you can go to ±5mm; if there is an additional vibration in the direction of the hose, you should install 2 shock pipes into 90 degrees right angles.